|
|
|
|
|
|
|
 |
Commercial |
|
| |
Requirements for Multiple Dwellings
(A)Trailer Parks, RV, or Campsite Park/ or Trailer RV and campsite, Park Condominium:
The Owner of a Trailer Park shall be required to pay one (1) system development fee per one permanent trailer space. The owner of an R.V. or Campsite space in a trailer park , RV or campsite park shall be required to pay one SD fee per three spaces, and any number of RV or campsite spaces less than three shall be required to pay one system development fee.
(B) Marina and/ or Boat Stall:
The owner of a marina and/ or boat stalls for lease or rent shall be required to pay one system development fee per ten boat slips or stalls for lease or rent. A condominium, time share complex, accommodations for lease or rent, hotel, motel or any other commercial enterprise providing boat slips shall be required to pay one SD fee per ten boat slips or stalls.
(C)Hotels, Motels, or Accommodations for lease or rent
The owner of any hotel, motel or any other accommodations for lease or rent shall be required to pay one system development fee per three hotel rooms, motel rooms or other accommodations for lease or rent except that any such hotel, motel or other accommodations lease or rent shall be required to pay one SD fee per one room/ unit if said room /unit provides kitchen, kitchenette or similar facilities. Other accommodations for lease or rent do not mean condominium units or time share unit (ir respective of the form of right to possession or ownership).(D) Condominiums, Time shares and Apartments. The owner, developer, contractor and/ or builder of any condominium project, time share project (irrespective of the form of right to possession or ownership) or apartment complex shall be required to pay one SD fee per single unit or apartment complex unit, except that boat stalls or slips serviced as a part of said condominium, time share or apartment complex shall be governed by paragraph 1(B) above.
Requirements for Commercial/ Business
(A) The Commercial/ Business user criteria for system development fees has been formulated using a gallons per day (GPD) formula. The formula used to arrive at this potential capacity of a commercial/ business customer varies depending on the particular type type of a commercial/ business customer depending on the particular type of customer (i.e. shopping center, restaurant, miscellaneous stores/ shops, laundry, ect.). Additionally care has been taken to insure that commercial/ business customers do not receive any benefits greater than those received by a residential customer and insure that the residential customer dose not subsidize the commercial/ business program
.(B) The base for calculating each impact fee is the current system development fee for residential users which is based upon the usage rate of 300 gallons per day (GPD) per user as determined by sound engineering principals and adopted by the Alabama Department of Environmental Management.
(C) The following formulas are used to determine the total GPD by which a commercial/business user actually impacts the districts system. These formulas then determine the number of SD fees to be paid in the same method as the residential user (i.e. 300 GPD equals one certified user equals one SD fee
.(D) The approiate number of system development fees to be paid by a commercial/business shall be determined as follows:Total GPD (based upon the customer type, calculation basis and formulas set forth below) divided by 300 GAD ( basis for SD quantity) equals total number of certified users equals total SD fees to be charged.
| Customer Type |
Calculation Basis |
Formula |
Basis for System Development Fee Quantity |
Restaurant
(food processing facilities) |
Combination Basis (fixtures/ square ft./ seats)
Fixture Units (fu) |
Total fu/19= number of SD fees |
The total of SD fees derived from these three
(fu, sf, number of seats)
are then averaged
for total system development fee. |
|
Square ft (sf) Contained in patron occupied area |
Total sf/15sf patron= total number of patrons x 30 GPD/ patron Total GPD/ 300= Total # of SD fees |
300 GPD |
|
Seat Quanity
(actual # of patron seats) |
Total # of seats x 30 GPD Total GPD/300= Total # of SD fees |
|
| Laundry Facility |
Washer Sizes
(listed by pounds) |
(lbs) x 2 gal per lbs per cycle x 10 cycles per washer per day= GPD x # of washers= total GPD/ 300= |
300 GPD | |
|
|
|
|
|
|
|
|
|
